Tripp Lite B004-DUA2-HR-K KVM switch Black

The B004-DUA2-HR-K is a 2-Port, DVI Dual Link / USB KVM Switch with audio and USB 2.0 peripheral sharing. It allows you to access, control, boot and reboot two computers from a single USB keyboard, USB mouse, and monitor. Switching between connected computers is quick and simple using keyboard hotkeys or pushbuttons. An independent audio/mic and USB peripheral switching function allows for an uninterrupted experience. A computer can be printing on a printer connected to one of the USB 2.0 peripheral ports, while you listen to audio from and access another computer; all at the same time. The B004-DUA2-HR-K uses DVI-I technology, allowing for the transmission of a Dual Link digital (up to 2560x1600) or analog (up to 2048 x 1536) signal. A DVI to VGA adapter, such as Tripp Lite's P126-000, is required for conversion to an analog monitor. Whichever you use, full time DDC support provides the necessary EDID information required for optimal video performance on Windows 7 and other operating systems. Compatible with all major operating systems. - Control 2 computers with a single DVI monitor, USB keyboard and USB mouse - Supports DVI Dual Link resolution 2560 x 1600 - 2 sets 1.83 m (6-ft.) cables included" - 2-Port DVI Dual Link/USB KVM switch with 7.1 channel surround-sound audio and USB 2.0 peripheral sharing (B004-DUA2-HR-K) - Built-in 2-Port USB 2.0 hub allows USB devices to be shared amongst computers connected to the KVM switch - 3.5 mm Mini Stereo Speaker and Microphone jacks allow a single microphone to provide audio input to each of the connected computers, and let you listen to the audio output of each computer on a single set of speakers - B004-DUA2-HR-K features additional audio jacks for use with 7.1 channel surround-sound - An additional set of console audio jacks are conveniently located on the front panel of the KVM switch, making them ideal for use with IP phones - The KVM, USB and Audio can be switched independently of each other - Features mouse port switching functionality*, which allows users accessing the KVM switch with a scroll mouse to switch between ports by double-clicking the mouse’s scroll wheel - Switch between connected computers via front panel pushbuttons, keyboard hotkeys, and the mouse switching function* - Auto Scan mode allows you to scan the connected computers without having to manually switch between them - Supports both analog and digital video signals, allowing for the connection of a VGA computer and/or monitor with a DVI to VGA adapter - Supports digital video resolutions up to 2560 x 1600 and analog video resolutions up to 2048 x 1536 - Multi-platform support – Compatible with Windows, Mac, Sun and Linux - Supports hot-plugging – Computers and devices can be unplugged and re-plugged without having to shut down the KVM switch - The KVM switch stores the monitor’s EDID (Extended Display Identification Data) to optimize display resolution - LEDs provide for easy monitoring of connected computers - Power-On-Detection recognizes when a connected computer has been powered-off and automatically switches to the next powered-on computer - HDCP compliant - Console mouse port emulation/bypass feature supports most mouse drivers and multifunction mice - Console keyboard port emulation/bypass feature supports most gaming/multimedia keyboards - Multilingual keyboard mapping – supports English, Japanese, and French keyboards - Quick installation without the need for software - Sun/Mac keyboard support and emulation** - Firmware upgradeable *The mouse switching function is disabled by default, and needs to be turned on via keyboard hotkey command. It is only available when using a mouse with a scroll wheel.**PC keyboard combinations emulate Sun/Mac keyboards. Sun/Mac keyboards only work with their own computers.