You have no items in your shopping cart.
Categories
Menu
Transition Networks C2210-1011 network media converter Internal 100 Mbit/s 1300 nm Multi-mode1

Transition Networks C2210-1011 network media converter Internal 100 Mbit/s 1300 nm Multi-mode

Transition Networks C2210-1011. Maximum data transfer rate: 100 Mbit/s, Converter input interface: 100Base-TX, Converter output interface: 100BASE-FX. Fiber optic connector: ST, Connectivity technology: Wired. Maximum transfer distance: 78740.2" (2000 m), Wavelength: 1300 nm, Fiber mode structure: Multi-mode. Certification: CISPR/EN55022 A, FCC A, CE, EN55024. Power consumption (typical): 2.5 W
Manufacturer: Transition Networks
Availability: Out of Stock - on backorder and will be dispatched once in stock.
SKU: 6759954
Manufacturer part number: C2210-1011
MSRP: $286.00
$242.62
The ION C2210 device provides an interface between 10/100Base-TX ports and 100Base-FX ports allowing users to integrated fiber optic cabling into 10/100Base-TX copper environments. - Auto-Negotiation of speed and duplex on TP port - AutoCross™ on TP port - Link Pass Through (LPT) fault monitoring - Far-End-Fault (FEF) detection - Pause (Software Controlled) - Automatic Link Restoration - Remote Firmware Upgrade - Can be used in any ION Platform Chassis - Standards based, will link with any standard 10/100Base-TX and any standard 100Base-FX ports - The following manageable features are available when used in an ION Platform chassis along with an ION Management Module. Report converter status to chassis management software: - TP and Fiber Link Status - Hardware switch settings - Copper Port Speed - TP and Fiber Port Duplex - Fault condition Write operation includes: - Power on/off device - Auto-Negotiation enable/disable - Force 10 Mbps or 100 Mbps - Force half or full duplex - Select advertising modes when Auto-Negotiation is enabled - LPT enable/disable - FEF enable/disable - Pause enable/disable - AutoCross™ enable/disable
The ION C2210 device provides an interface between 10/100Base-TX ports and 100Base-FX ports allowing users to integrated fiber optic cabling into 10/100Base-TX copper environments. - Auto-Negotiation of speed and duplex on TP port - AutoCross™ on TP port - Link Pass Through (LPT) fault monitoring - Far-End-Fault (FEF) detection - Pause (Software Controlled) - Automatic Link Restoration - Remote Firmware Upgrade - Can be used in any ION Platform Chassis - Standards based, will link with any standard 10/100Base-TX and any standard 100Base-FX ports - The following manageable features are available when used in an ION Platform chassis along with an ION Management Module. Report converter status to chassis management software: - TP and Fiber Link Status - Hardware switch settings - Copper Port Speed - TP and Fiber Port Duplex - Fault condition Write operation includes: - Power on/off device - Auto-Negotiation enable/disable - Force 10 Mbps or 100 Mbps - Force half or full duplex - Select advertising modes when Auto-Negotiation is enabled - LPT enable/disable - FEF enable/disable - Pause enable/disable - AutoCross™ enable/disable
Products specifications
Attribute nameAttribute value
Packaging data
Package weight15.9 oz
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Connectivity technologyWired
Design
CertificationCISPR/EN55022 A, FCC A, CE, EN55024
InternalY
Power
Power consumption (typical)2.5 W
Weight & dimensions
Dimensions (WxDxH)0.866 x 5 x 3.39"
Features
Fiber mode structureMulti-mode
LED indicatorsY
Other features
MAC address table1000 entries
Performance
Maximum data transfer rate100 Mbit/s
Wavelength1300 nm
Fiber optic connectorST
Maximum transfer distance78740.2"
Networking standardsIEEE 802.3
Network
Converter input interface100Base-TX
Converter output interface100Base-FX
Customer service
Information
Copyright © 2024 Printer Supplies Warehouse. All rights reserved.
Powered by nopCommerce