Allied Telesis AT-CM3K0S network media converter 1000 Mbit/s

Allied Telesis AT-CM3K0S. Maximum data transfer rate: 1000 Mbit/s, Cabling technology: 10/100/1000T. Connectivity technology: Wired. Mean time between failures (MTBF): 1530000 h. Compliance industry standards: IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3ah, Safety: UL 60950-1 (cULUS), EN-60950-1 (TUV), EN-60825, Certification: FCC, EN-55022, VCCI, C-Tick, CE.. Power consumption (typical): 6 W
SKU: 2481525
Manufacturer part number: AT-CM3K0S
MSRP: $708.00
$490.83
This media and rate converter line card features a 10/100/1000T twisted pair port and an optical SFP port. The twisted pair has an RJ-45 connector and a maximum operating distance of 100 meters (328 feet) when connected to an Ethernet or Fast Ethernet or Gigabit Ethernet device. They operate in full or half-duplex mode, and allow you to build an affordable network, avoiding the cost of terminatiang fiber cables. The AT-CM3K0S has a SFP port supporting both Fast Ethernet and Gigabit operation, allowing a choice of multi/single mode, dual/single fiber SFP modules. - Converts speed as well as media type - Extends Ethernet and Fast Ethernet and Gigabit Ethernet networks - Supports IEEE 802.3ah ‘Ethernet in the First Mile’ - Support MissingLink™ and Smart MissingLink™ - Transparent to IEEE 802.1Q VLAN packets - Jumbo Frame Support - Rate Limiting - Low Power Mode - Supports Dying Gasp - Automatic address learning and aging - Managed, or Unmanaged operation - Auto MDI/MDI-X - Auto-Negotiation (IEEE 802.3u-compliant) - Store and forward data packet handling - Supports 100 and 1000Mbps SFPs - System and port LEDs - Line card for all Converteon™ series chassis - Limited lifetime warranty
This media and rate converter line card features a 10/100/1000T twisted pair port and an optical SFP port. The twisted pair has an RJ-45 connector and a maximum operating distance of 100 meters (328 feet) when connected to an Ethernet or Fast Ethernet or Gigabit Ethernet device. They operate in full or half-duplex mode, and allow you to build an affordable network, avoiding the cost of terminatiang fiber cables. The AT-CM3K0S has a SFP port supporting both Fast Ethernet and Gigabit operation, allowing a choice of multi/single mode, dual/single fiber SFP modules. - Converts speed as well as media type - Extends Ethernet and Fast Ethernet and Gigabit Ethernet networks - Supports IEEE 802.3ah ‘Ethernet in the First Mile’ - Support MissingLink™ and Smart MissingLink™ - Transparent to IEEE 802.1Q VLAN packets - Jumbo Frame Support - Rate Limiting - Low Power Mode - Supports Dying Gasp - Automatic address learning and aging - Managed, or Unmanaged operation - Auto MDI/MDI-X - Auto-Negotiation (IEEE 802.3u-compliant) - Store and forward data packet handling - Supports 100 and 1000Mbps SFPs - System and port LEDs - Line card for all Converteon™ series chassis - Limited lifetime warranty
Products specifications
Attribute nameAttribute value
Weight3.99 oz
Harmonized System (HS) code85176990
Ports & interfaces
Connectivity technologyWired
Design
CertificationFCC, EN-55022, VCCI, C-Tick, CE.
Compliance industry standardsIEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3ah
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-25 - 70 °C
Operating relative humidity (H-H)5 - 95 %
Storage relative humidity (H-H)5 - 95 %
Operating altitude0 - 120000"
Power
Power consumption (typical)6 W
Weight & dimensions
Dimensions (WxDxH)0.866 x 2.87 x 5.12"
Features
SafetyUL 60950-1 (cULUS), EN-60950-1 (TUV), EN-60825
Mean time between failures (MTBF)1530000 h
Full duplexY
Other features
Packet transfer speed14880, 148800, 1488000 pps
MAC address table1000 entries
Performance
Maximum data transfer rate1000 Mbit/s
Cabling technology10/100/1000T