Cisco 1000Base SX SFP - 850nm - LC - C Temp network media converter 1000 Mbit/s

Cisco 1000Base SX SFP - 850nm - LC - C Temp. Maximum data transfer rate: 1000 Mbit/s, Cabling technology: 1000Base SX. Connectivity technology: Wired. Wavelength: 850 nm, Mean time between failures (MTBF): 7919921 h. Compliance industry standards: IEEE-802.3. Power consumption (typical): 1 W
Manufacturer: Cisco
Availability: Out of Stock - on backorder and will be dispatched once in stock.
SKU: 10001587
Manufacturer part number: ONS-SC-GE-SX=
MSRP: $602.20
$465.69
The SFP transceiver module is a bidirectional device with a transmitter and receiver in the same physical package. The module interfaces to the network through a connector interface on the electrical ports and through an LC termination connector on the optical ports. Electrical interfaces and dimensions are defined in the SFF-8472 industry-standard multisource agreement (MSA). Transmitter In the transmit direction, the SFP transceiver module receives the electrical signal and transmits this data in an optical signal by using a laser driver that controls the laser diode. The optical output power is held constant by an automatic power control circuit. Receiver In the receive direction, the SFP transceiver module receives an NRZ optical signal and converts it to an electrical equivalent. The receive portion of the module will use some kind of amplifier to control the converted electrical signal. EEPROM This type of SFP transceiver is identified by the standard two-wire serial interface used in EEPROM with an I2C interface (with serial ID functions) that is part of the GBIC specifications and the SFF-8472 MSA. In addition, EEPROM offers an enhanced monitoring interface for optical transceivers as described in SFF-8472, which allows real-time access to the device to enable monitoring of received optical power, laser bias current, laser optical output power, etc.
The SFP transceiver module is a bidirectional device with a transmitter and receiver in the same physical package. The module interfaces to the network through a connector interface on the electrical ports and through an LC termination connector on the optical ports. Electrical interfaces and dimensions are defined in the SFF-8472 industry-standard multisource agreement (MSA). Transmitter In the transmit direction, the SFP transceiver module receives the electrical signal and transmits this data in an optical signal by using a laser driver that controls the laser diode. The optical output power is held constant by an automatic power control circuit. Receiver In the receive direction, the SFP transceiver module receives an NRZ optical signal and converts it to an electrical equivalent. The receive portion of the module will use some kind of amplifier to control the converted electrical signal. EEPROM This type of SFP transceiver is identified by the standard two-wire serial interface used in EEPROM with an I2C interface (with serial ID functions) that is part of the GBIC specifications and the SFF-8472 MSA. In addition, EEPROM offers an enhanced monitoring interface for optical transceivers as described in SFF-8472, which allows real-time access to the device to enable monitoring of received optical power, laser bias current, laser optical output power, etc.
Products specifications
Attribute nameAttribute value
Ports & interfaces
InterfaceSFP
Connectivity technologyWired
Design
Compliance industry standardsIEEE-802.3
Operational conditions
Operating temperature (T-T)0 - 70 °C
Power
Power consumption (typical)1 W
Features
Mean time between failures (MTBF)7919921 h
Plug and PlayY
Other features
Connector(s)LC-LC
Performance
Cabling technology1000Base SX
Maximum data transfer rate1000 Mbit/s
Wavelength850 nm